TAMAGAWA SEIKI co.,ltd.

home

TOP > Control Machines, Sensor Applied Products  > Positioning System  > Positioning SystemⅡ (SmartCam)

Control Machines, Sensor Applied Products

Positioning SystemⅡ (SmartCam)

PDF Catalog

1568n7ej.pdf  (9.1 MB)

Specification list

"Smartcam" is a generic term used to refer to digital converters equipped with a resolver or an optical encoder as a sensor.
It includes 1-turn types, multi-turn types and single/multi turn exchangeable types.

Steel, Crane, Packing Wrapping, Food, Printing machine, Press machine

Over the past 70 years, we have been engaged in research, development, and manufacture of FA equipment such as Synchro, Resolver, Gyro, and so on.
Based on long-standing experience and a wealth of know-how accumulated through the production of control equipment for steel plants and water processing, we proudly propose a smart position detecting system" Smartcam".
In addition to the conventional systems, Smartcam has new lineups equipped with absolute encoders for higher accuracy and resolution.
We recommend Smartcam, with confidence, as the right position detector that ensures you high reliability, safety, and labor efficiency.

Features

Smart Cam is a programmable Electronic Cam signal output unit, which replaces conventional mechanical cam switching system or pulse detecting units, used for general position control of machines.
Sensor unit is a brushless resolver, Smartsyn, known as an environmentally reliable long-life unit. The sine/cosine analog signal proportional to the shaft rotation is converted to digital angle data via R/D converter incorporated in the control unit.
Programmable On/Off signals (Cam signals), along with position data in pure binary or BCD, are output via photocoupler interfaces.
A handy terminal or a PC (Windows) can be used for a display monitor and a programming interface.
A variety of resolver units are available at your option, e.g. small built-in type, rugged enclosed type, IP67 waterproof type, etc.

Features of Sensors (Detectors)
  • Angle sensors with good resistance to hostile environments.
  • High accuracy absolute
  • High tracking speed
    Capable of rotating up to 2,000 rev/min.
  • Sensors for various use and environment.
    From built-in type (hollow shaft) to small size, middle size, and water-proof IP67, sensors can be widely selected.
  • Small size and maintenance free
  • Environment-resistant.
    Errors due to cables and noise are reduced by using 1 phase excitation and 2 phase output signals.
    Transmission up to 500m Max. is capable by shielded twisted pair cable.
Features of Smartcam(Digital converter)
  • Conversion method protected from external noise.
  • Small size & light weight
    Reduced space and saved resources by removing common parts.
  • Multiple output
    Outputs of cam, position and speed (1turn type) are transmitted and combinations of these outputs can be selected by an output mode.
  • Variety data communication and display setting
    It is possible to transfer data to multiple Smartcam by using one handy terminal (or personal computer).
    It is also possible to set and / or monitor by user's system, using a dedicated protocol.
  • Response to network
    Farther wire-saving is realized by developing products responding to CC-Link.
  • Control panel allowing for CC-Link

Combination list for Sensors

Series Smartsyn
Shaft type
External appearance position02-shaft.jpg
Model TS2611N11E90 TS2623N11E90 TS2622N41E90
Internal
gear
construction		 X Direct
Y -
Z -
Protecting
class
for structure		 IP52
Permissible
rotational
speed.
(min-1)		 6,000 3,000 6,000
Operating
temperature.
(°C)		 -30∼+100 -10∼+80 -30∼+100
Vibration 196m/s2
(20G)		 98m/s2
(10G)		 196m/s2
(20G)
Shock 980m/s2
(100G)		 4,900m/s2
(500G)		 980m/s2
(100G)
Remarks      
Series Smart transmitter
Small size
External appearance position02-small.jpg
Model TA4751N□□□ TA4755N□□□ TA4757N□□□
Internal
gear
construction		 X Direct or 1/2∼1/64
Y 1/64
Z 1/64
Protecting class
for structure		 Dust proof IP55 IP67
Permissible
rotational speed.
(min-1)		 2,000
Operating
temperature.
(°C)		 -20∼+80
Vibration 196m/s2
(20G)
Shock 4,900m/s2
(500G)
Remarks Internal gear construction
position02-02.gif
Series Smart transmitter
Middle size
External appearance position02-middle.jpg
Model TA4765N□□□□TA4767N□□□□
Internal
gear
construction		 X Direct or 1/2∼1/64
Y 1/64
Z 1/64
Protecting class
for structure		 IP55 IP67
Permissible
rotational speed.
(min-1)		 2,000
Operating
temperature.
(°C)		 -20∼+80
Vibration Flange type Base-mount type
196m/s2
(20G)		 98m/s2
(10G)
Shock 2,940m/s2
(300G)
Remarks Internal gear construction
position02-02.gif
Series Smart sensor Optical encoder
Environment-resistant 11bit
Shaft type		 17bit
Shaft type
External appearance position02-environment.jpg
Oil-bath type		 position02-optical01.jpg position02-optical02.jpg
Model TA4768N□□□□1 turn type TA4769N□□□□Multi-turn type TS5667N480□
Smartcam sensor		 TS5667N430□
Optical absolute encoder
(Smart abs.)
Internal
gear
construction		 X 1/1∼1/64 Direct
Y - 1/64 -
Z - -
Protecting class
for structure		 IP67 IP55
Permissible
rotational speed.
(min-1)		 2,000 2,000
Operating
temperature.
(°C)		 -20∼+120 -10∼+80
Vibration 196m/s2
(20G)		 98m/s2
(10G)
Shock 4,900m/s2
(500G)		 1,960m/s2
(200G)
Remarks Internal gear construction
position02-02.gif		 1 turn type Multi-turn type

Combination list for SmartCam

Series Position converter
Model / Name TA4584N500
Pos. conv.
 TA4688N200E1
Pos. conv.
(High accuracy)		 TA4848N100E1
Pos. conv.		 TA4747
R/D Converter		 TA4681N100E1
Pos. conv.
Power Source DC 24V
0.5A Max.		 DC 24V
0.2A Max.		 DC 5V
0.7A Max.
from sequencer bus		 DC 24V
0.2A Max.		 DC 24V
0.5A Max.
Mounting method Alone type ○ ○ - ○ ○
Slot-in type - - ○
Mitsubishi
sequencer		 - -
Applicable Sensor   Smartsyn ○ - ○ ○ ○
Smart Transmitter ○ - ○ ○ ○
Encoder - ○ - - -
Tracking Speed (min.-1) 2,000 6,000 5,000 3,000 2,000
Accuracy ±0.5° ±0.022° ±0.5° ±0.3° ±0.5°
Position output Position ○ ○ ○ ○ ○
Cam - - - - -
Communication interface CC-Link - - - - Position op.
○
(Mitsubishi : PLC)
RS232C - - - - Setting
○
RS422 - - - - SIO
○
USB ○ - - - -
Cable length(m) 300 20 300 300 100
Remarks PC Software EU6904       BCD Position output/ (used with I/O TA4562N1)
Series Smart limit
Model / Name TA4570N500E110, 130
Smart limit		 TA4579N500E1
Smart limit		 TA4848N200E1
Smart limit		 TA4681N200E1
Smart limit
Power Source DC 24V
0.5A Max.		 DC 24V
0.5A Max.		 DC 5V
0.7A Max.
from sequencer bus		 DC 24V
0.5A Max.
Mounting method Alone type ○ ○ - ○
Slot-in type - - ○
Mitsubishi
sequencer		 -
Applicable Sensor   Smartsyn ○ ○ ○ ○
Smart Transmitter ○ ○ ○ ○
Encoder - - - -
Tracking Speed (min.-1) 2,000 2,000 5,000 2,000
Accuracy ±0.5° ±0.5° ±0.5° ±0.5°
Position output Position ○ - ○ ○
Upper/Lower limit
(2ch)
Cam ○
32Cam		 ○
10Cam		 ○
8Cam		 ○
16Cam
Communication interface CC-Link - - - Position & Cam
○
(Mitsubishi : PLC)
RS232C Setting
○		 - - Setting
○
RS422 SIO
○		 - ○
A/Bphase
pulse op.		 SIO
○
USB - - - -
Cable length(m) 100 100 300 100
Remarks Cam & preset 30points are extendable, used with I/O TA4562N1
Connectable with handy terminal (TA4561)
PC software EU659□		 PC software EU659□   BCD Position output/ (used with I/O TA4562N1)
Series Smart cam
Model / Name TA4560N500E10
Smart cam		 TA4680N100E1
Smart cam (for press machine control)		 TA4685N500E1
Smart cam (High accuracy)
Power Source DC 24V
0.5A Max.		 DC 24V
0.5A Max.		 90∼265V
50/60Hz
25VA Max.
Mounting
method		 Alone type ○ ○ ○
Slot-in
type		 - - -
Applicable
Sensor		   Smartsyn ○ ○ -
Smart Transmitter ○ ○ -
Encoder - - ○
Tracking Speed (min.-1) 5,000 5,000 1,500
Accuracy ±0.5° ±1° ±0.1°
Position
output		 Position ○ ○ -
Cam ○
32Cam		 ○
32Cam		 ○
64Cam
Timing pulse
Communication interface CC-Link - - -
RS232C Setting
○		 Setting
○		 Setting
○
RS422 SIO
○		 SIO
○		 -
USB - - -
Cable length(m) 100 500 20
Remarks Connectable with angle indicator TA4563
Connectable with handy terminal (TA4561)
PC software EU659□		 Connectable with angle indicator TA4563 Open collector output (DC24V 5∼50mA)
PC software EU6600
Series Option
Model / Name TA4561N□50E□□ Handy terminal EU659□N□□00, EU6600, EU6904
PC soft		 TA4563
Angle Indicator		 TA4562N1
I/O terminal
Power Source DC 12V
0.1A Max.
from conv.		 - DC 24V
0.1A Max.
from conv.		 DC 24V
0.2A Max.
from conv.
Mounting method Alone type - - ○ ○
Slot-in type - - - -
Applicable Sensor   Smartsyn Data setting for TA4560, 4570 etc. Series

LCD display 16letters×2lines
Operating mode display by LED		 TA4560, 4565 Series / Single speed type
- EU659□

TA4570, 4579 Series / Double speed type
- EU659□

TA4685N500/EU6600
TA4584N500/EU6904		 Roulette display : Red LED 72point

Angle / Speed display : 7SEG LED 4digit		 PI : 30point Transistor DC24V 8mA (Typ)
PO : 30point Transistor Open Collector DC24V 5∼300mA
Smart Transmitter
Encoder
Tracking Speed (min.-1)
Accuracy
Position output Position
Cam
Communication interface CC-Link
RS232C ○ ○ - -
RS422 - - ○ ○
USB - - - -
Cable length(m) - - 100m 100m
The relation products

Positioning SystemⅠ(Synchro, Encoder, SynchroCam)

Positioning SystemⅡ (SmartCam)

prev

back toback to Positioning System

back toback to Control Machines, Sensor Applied Products

∴PageUp↑

Control Machines, Sensor Applied Products

Copyright ©Tamagawa seiki Co,.Ltd,.All Rights Reserved.